Pengaruh Temperatur Karbonisasi Terhadap Karakteristik Briket Berbasis Arang Sekam Padi Dan Tempurung Kelapa

Keywords: Briquettes, Carbonization , Coconut Shell Charcoal, Rice Husk Charcoal.

Abstract

The effects of carbonized temperature on the briket-based properties of rice husks and coconut shells. This study aims to determine the effects of carbonization on brique-based, rice husk and coconut shell which include water content, ash content, volatile matter content, and calorific value. The research method used in this study is purely experimental within a process of carbonization of rice husk divested by free variables at temperatures of 300°C, 400°C, and 500°C for 30 minutes and carbonized coconut shells with a constant variable temperature of 500°C for 2 hours. Measures of a rice chaff and coconut shell of 200 mesh. Making briquettes with fixed variables, namely the composition of rice husk charcoal: coconut shell charcoal = 1: 3 (5 g:15 g) and printed using a pressure of 99.91 kPa. Then do the testing of water content, ash content, volatile matter and heating value. Test results on each type of briquettes with variations in the temperature of 300°C rice husk carbonization and 500°C coconut shell, 400oC rice husk carbonization temperature and 500°C coconut shell and 500°C rice husk carbonization temperature and 500°C coconut shell temperature were respectively obtained for 0.78% water content , 0.56% and 0.41%, ash content of 42.40%, 35.50% and 32.70%, volatile matter of 26.19%, 24.92% and 24.38%, and calorific value amounted to 3381.70 cal/g, 4261.50 cal/g, and 4621.50 cal/g.

Downloads

Download data is not yet available.

References

A. Ismayana and M. R. Afriyanto, “Pengaruh Jenis Dan Kadar Bahan Perekat Pada Pembuatan Briket Blotong Sebagai Bahan Bakar Alternatif,” J. Tek. Ind., vol. 21, no. 3, pp. 186–193, 2014.

H. R. Suryadi, R. Ruslan, N. Afrianah, A. Irsyad, A. Haris, and J. Jasruddin, “Pengaruh jenis aktivator terhadap nilai kapasitansi elektroda karbon dari tempurung kelapa,” J. Aceh Phys. Soc., vol. 11, no. 2, pp. 52–58, 2022, doi: 10.24815/jacps.v11i2.23789.

A. Demirbaş, “Physical properties of briquettes from waste paper and wheat straw mixtures,” Energy Convers. Manag., vol. 40, no. 4, pp. 437–445, 1999, doi: 10.1016/S0196-8904(98)00111-3.

Compete, Competence platform on energy crop and agroforestry system for arid and semi-arid ecosystems – Africa. Germany: Compete, 2009.

D. Fatmawati and P. H. Adiwibowo, “Pembuatan Biobriket Dari Campuran Enceng Gondok Dan Tempurung Kelapa Dengan Perekat Tetes Tebu,” J. Tek. Mesin, vol. 3, no. 02, pp. 315–322, 2014.

D. Hendra, “Rekayasa Pembuatan Mesin Pellet Kayu dan Pengujian Hasilnya.,” J. Penelit. Has. Hutan, vol. 30, no. 2, pp. 144–154, 2012.

D. Maryono, “Pembuatan dan Analisis Mutu Briket Arang Tempurung Kelapa Ditinjau dari Kadar Kanji Preparation and Quality Analysis of Coconut Shell Charcoal Briquette Observed by Starch Concentration .,” J. Chem., vol. 14, no. 1, pp. 74–83, Jun. 2013.

I. Qistina, D. Sukandar, and T. Trilaksono, “Kajian Kualitas Briket Biomassa dari Sekam Padi dan Tempurung Kelapa,” J. Kim. Val., vol. 2, no. 2, pp. 136–142, 2016, doi: 10.15408/jkv.v2i2.4054.

Iriany, Firman Abednego Sarwedi Sibarani, and Meliza, “Pengaruh Perbandingan Tempurung Kelapa Dan Eceng Gondok Serta Variasi Ukuran Partikel Terhadap Karakteristik Briket,” J. Tek. Kim. USU, vol. 5, no. 3, pp. 56–61, 2016, doi: 10.32734/jtk.v5i3.1546.

J. M. Onchieku, B. N. Chikamai, and M. S. Rao, “Optimum Parameters for the Formulation of Charcoal Briquettes Using Bagasse and Clay as Binder,” Eur. J. Sustain. Dev., vol. 1, no. 3, p. 477, 2012, doi: 10.14207/ejsd.2012.v1n3p477.

J. T. Oladeji, “Comparative Study of Briquetting of Few Selected Agro-Residues

Commonly Found in Nigeria .,” Pacific J. Sci. Technol., vol. 13, no. 2, pp. 80–86, 2012.

M. Y. Thoha and D. E. Fajrin, “Pembuatan Briket Arang dari Daun Jati dengan Sagu Aren Sebagai Pengikat,” J. Tek. Kim., vol. 17, no. 1, pp. 34–43, 2010.

M. Tirono and A. Sabit, “TERHADAP NILAI KALOR ARANG TEMPURUNG KELAPA ( Coconut Shell Charcoal ),” J. Neutrino, vol. 3, no. 2, pp. 143–152, 2011.

N. Yuliza, N. Nazir, and M. Djalal, “Pengaruh Komposisi Arang Sekam Padi dan Arang Kulit Biji Jarak Pagar Terhadap Mutu Briket Arang,” J. Litbang Ind., vol. 3, no. 1, p. 21, 2013, doi: 10.24960/jli.v3i1.617.21-30.

R. I. Muazu and J. A. Stegemann, “Biosolids and microalgae as alternative binders for biomass fuel briquetting,” Fuel, vol. 194, pp. 339–347, Apr. 2017, doi: 10.1016/j.fuel.2017.01.019.

R. Ruslan et al., “Pengaruh Ukuran Partikel Terhadap Karakteristik Briket Berbasis Sekam Padi dan Tempurung Kelapa,” J. Ilmu Fis. Teor. dan Apl., vol. 2, no. September, pp. 59–65, 2020, [Online]. Available: http://ejournals.umma.ac.id/index.php/jifta/article/view/871.

Rahman, “UJI KERAGAAN BIOPELET DARI BIOMASSA LIMBAH SEKAM PADI (Oryza sativa sp.) SEBAGAI BAHAN BAKAR ALTERNATIF TERBARUKAN,” INSTITUT PERTANIAN BOGOR, 2011. [Online]. Available: https://repository.ipb.ac.id/handle/123456789/53055.

Riyadi, S. T. Dwiyati, A. Kholil, and A. Ilahi, “Charcoal Briquettes Characteristics of HDPE Mixed with Water Hyacinth, Coconut Shell, and Bagasse,” Int. J. Energy Eng., vol. 6, no. 3, pp. 43–48, 2016, doi: 10.5923/j.ijee.20160603.01.

S. A. Ndindeng et al., “Quality optimization in briquettes made from rice milling by-products,” Energy Sustain. Dev., vol. 29, pp. 24–31, 2015, doi: 10.1016/j.esd.2015.09.003.

S. Siahaan, M. Hutapea, and R. Hasibuan, “Penentuan Kondisi Optimum Suhu dan Waktu Karbonisasi pada Pembuatan Arang dari Sekam Padi,” J. Tek. Kim. USU, vol. 2, no. 1, pp. 26–30, 2013.

S. Wibowo, W. Syafi, and G. Pari, “KARAKTERISTIK ARANG AKTIF TEMPURUNG BIJI NYAMPLUNG (Calophyllum inophyllum Linn),” J. Penelit. Has. Hutan, vol. 28, no. 1, pp. 43–54, 2010, [Online]. Available: http://ejournal.forda-mof.org/ejournal-litbang/index.php/JPHH/article/view/786.

Sarjono, “Studi Eksperimental Perbandingan Nilai Kalor Briket Campuran Bioarang Sekam Padi dan Tempurung Kelapa,” Maj. Ilm. STTR Cepu, pp. 11–18, 2013.

T. H. Mwampamba, M. Owen, and M. Pigaht, “Opportunities, challenges and way forward for the charcoal briquette industry in Sub-Saharan Africa,” Energy Sustain. Dev., vol. 17, no. 2, pp. 158–170, Apr. 2013, doi: 10.1016/j.esd.2012.10.006.

Widya Gema Bestari, Mutiara Mendopa, and Rosdanelli Hasibuan, “Karakteristik Briket Dari Sekam Padi Dan Ketaman Kayu Berperekat Daun Jambu Mete,” J. Tek. Kim. USU, vol. 5, no. 2, pp. 15–20, 2016, doi: 10.32734/jtk.v5i2.1529.

W. R. Smith, Energy from Forest Biomass, 11th ed. New York; London: 1982 Elsevier Inc. All rights reserved., 1982. doi: 10.5558/tfc53297c1-5.

Y. Ristianingsih, A. Ulfa, and rachmi syafitri K.S, “Karakteristik Briket Bioarang Berbahan Baku Tandan,” Konversi, vol. 4, no. 2, pp. 16–22, 2015.

Published
2023-01-01
How to Cite
Afrianah, N., Ruslan, R., Suryadi, H. R., Amir, I., Irsyad, A., Jasruddin, & Nurhayati. (2023). Pengaruh Temperatur Karbonisasi Terhadap Karakteristik Briket Berbasis Arang Sekam Padi Dan Tempurung Kelapa. JFT: Jurnal Fisika Dan Terapannya, 9(2), 138-147. https://doi.org/10.24252/jft.v9i2.25566
Section
Artikel
Abstract viewed = 313 times